System Backup

You can perform, set and check the Access Commander data backup and recovery in Settings > System Backup card. Data can be stored at the local storage or Server message Block (SMB). SMB is suitable for long-time backup retention.

Data backups can be performed one time or automatically in preset periodical intervals.

Every backup can be restored, downloaded or removed in a menu opened by clicking ikona-three-dots-acom at the backup list item.

One-Time Data Backup

  1. Go to Settings > System Backup card.

  2. Click Back Up Now in the bottom part of the card.

  3. Select whether or not to use data encryption. If so, complete the password to be entered for backup restoration.

Automatic Data Backup Settings

  1. Go to Settings > System Backup card.

  2. Click Ikona-pen-edit-acom at the Periodic Backup parameter.

  3. Set the required backup parameters:

    • Frequency – periodic backup interval

    • Time – backup time

    • Day – day in a week/month for backup

  4. Select whether or not to use data encryption. If so, complete the password to be entered for backup restoration.

Save the settings to make backups be performed automatically as set.

SMB Data Backup Settings

  1. Go to Settings > System Backup card.

  2. Click Ikona-pen-edit-acom at the Storage parameter.

  3. Choose the storage type: SMB.

  4. Complete the server address, login data and protocol version.

Save the settings to make the backups be sent to the preset Server Message Block.

Backup Data Restore

  1. Go to Settings > System Backup card.

  2. Open the extended menu ikona-three-dots-acom at the selected backup and select Ikona-restore-acom Restore.

Restore from Backup File

  1. Go to Settings > System Backup card.

  2. Click Restore from file in the bottom part of the card.

  3. Select the backup file from your storage and click Restore.

Data Transfer from Other Access Commander

  1. Go to Settings > System Backup card.

  2. Click Migrate in the bottom part of the card.

  3. Enter the Access Commander IP address from which the data will be transferred.

  4. Complete the administrator account login data of the Access Commander from which the data will be transferred.

Caution|/-/media/Images/Manuals/css/caution.png Caution

Make sure that the SSH service is enabled on the Access Commander from which the data will be transferred in order to import the data successfully.

Can we advise you on anything else?

Take advantage of our technical support and sales specialists.

Contact Support

Contact Sales