Network Configuration

Set the network connection in Settings > Configuration > Network card. The Network card shows and helps set the current parameters of Access Commander. Remember to enable manual configuration before setting the parameters.

The configuration methods include setting of the network parameters automatically from the DHCP server or manually. When the automatically set IP address from DHCP is changed into a manually set IP address, redirection to the manually entered IP address is made in the web browser. After redirection, Access Commander is restarted and system re-login is required.

Caution|/-/media/Images/Manuals/css/caution.png Caution
  • By changing the configuration method to DHCP, you change the server IP address and may cause connection interruption.

  • If you change the HTTP Proxy server, Access Commander will automatically restart.

Can we advise you on anything else?

Take advantage of our technical support and sales specialists.