Pairing Code Creation via PC

1. Download and install 2N IP USB Driver into your PC.

2. Make sure that the USB Bluetooth reader is enabled in Settings > Credentials > Enabled USB readers card.

3. Connect the USB Bluetooth reader to the PC.

4. Select Mobile key authentication in the user settings on the Credentials card.

5. Select Pair using reader in the open dialog box.

   The pairing code appears in the dialog box.

6. Follow the steps below for pairing in the application.

Pairing Code Creation Using Device

1. Make sure that

   • the pairing device is set for the given user’s company, refer to Company Settings;

   • the pairing device is located in the zone which the user is allowed to access, refer to Access Rules;

   • an adequate pairing time value is set, refer to Company Settings.

2. Select Mobile key authentication in the user settings on the Credentials card.

3. Select Pair using devices in the open dialog box.

4. The generated pairing code is displayed on the card together with the remaining pairing time. Transfer the pairing code to the user. If the user’s e-mail address is completed, you can send the mobile key by clicking .

5. Follow the steps below for pairing in the application.

Mobile Key Pairing

1. Download the Mobile Key application to your mobile phone. The application is now available at App Store and Google Play.

2. Open the application and enable Bluetooth access for Mobile Key.

3. According to the mobile key type, draw your mobile phone near the USB reader or the pairing device.

4. Click the device offered for pairing in Mobile Key.

5. The application prompts you to enter the PIN code. Enter the pairing code and confirm.