CAM Logs

CAM logs are used for automatic recording of several images preceding and following a selected event. You can manage various types of events in Settings > CAM Logs for which CAM logs are to be generated.

CAM logs can, for example, be generated whenever a card is swiped. Thus, 5 snapshots before the card swipe and 3 snapshots after the card swipe will be recorded in the access logs. The images are taken in 1-second intervals. A storage of the size of 1, 3 or 5 GB has been created for the snapshots. When the storage is full, the oldest snapshots are deleted. The access logs are not deleted.

CAM Log Type Creation

  1. Go to Settings > CAM Logs.

  2. Click the adding button in the right-hand upper corner of the page.

  3. Enter the CAM log event type name.

The new CAM log event type appears on the list and its detail opens in the CAM log. Set the events and devices for which the camera images shall be generated in the CAM log detail.

CAM Log Settings

You can administer information on the CAM log type in the CAM log detail. Click the selected CAM log list item to open the CAM log detail or the detail opens whenever a new CAM log is created.

Monitored Events

The card helps you select a list of events during which camera images shall be captured.

The monitored events can be as follows:

  • Accesses

    • User accepted

    • Vehicle license plate recognized

    • User denied

    • REX button pressed

  • Security

    • Tamper switch activated

    • Unauthorized door opening

    • Remote door opening

    • Access denied – repeated wrong entry

    • Silent Alarm activated

Monitored Devices

It is recommended that CAM logs are only recorded from a device equipped with a camera. Select a device in a dialog box opened using Ikona-pen-edit-acom. At the same time, the card allows the CAM log recording from all devices to be enabled.

Can we advise you on anything else?

Take advantage of our technical support and sales specialists.

Contact Support

Contact Sales