Language – set the language for the texts to be displayed. Choose one of the eight pre-defined languages (CZ, EN, DE, NL, FR, ES, IT, RU).

Custom Language – set the language for the texts to be displayed from an uploaded language file of the user localization.

Do Not Disturb mode – switches Do Not Disturb mode on/off. This allows you to switch off the ringtone for the incoming call for the period of time when this mode is active. By default, the DND mode does not apply to doorbell notification, i.e. the incoming ringtone is off and the doorbell ringtone is on. Change this setting via the web interface in the Hardware > Audio menu.

Reject Calls in DND Mode – with this function activated, the device rejects calls in the Do Not Disturb mode. The function can be used for immediate call forwarding at absence to a mobile phone call, for example.

Mute Doorbell in DND Mode – with this function activated, the device does not ring when the doorbell button is pressed in the DND mode.

Automatic date and time – activates a mode in which the date and time will be taken from the network.

Set Time Zone – set the time zone for your installation site to define time shifts and summer/winter time transitions.

Set date – used to set the date manually.

Set time – used to set time manually.

Time Format – set the time format to be displayed.

Date Format – set the date format to be displayed.

Ringtone Volume – set the incoming call ringtone volume.

Call Volume – set the phone call volume.

Ringtone – sets the ringtone for incoming calls on the device.

Doorbell Tone – set the tone to be played when the doorbell is used.

Voicemail – set the Voicemail modes directly on the device. This function helps leave a message to be played to the caller if the device fails to answer their incoming call. The caller can record a message to be stored in the device Voicemail and played back on the device later. This settings is particularly useful in working or personal environments where it is important to keep communication even if the user is absent.

Voicemail – enable the function that helps leave an out-of-office message to be played to the caller if the device fails to answer their incoming call for a period of time longer than as defined in Voicemail Activation Timeout. Once this function is enabled, the Enable Leaving Message parameter is activated automatically.

Select Recording – set the out-of-office message to be played to the calling user. You can record a new message through a microphone in this setting.

Default Recording Language – set the language for the default recording.

Enable Leaving Message – allow the caller to leave a message to be stored in the device. When the out-of-office message has been played, a tone is generated and recording starts for up to 20 s. The message includes both audio and video depending on the capacities of the calling device. End the call to terminate the recording earlier. If this function is disabled, the out-of-office message is only played and the call is ended afterwards.

Voicemail Activation Timeout – set the incoming call ringing timeout after which the out-of-office message is played.

Display weather – displays or hides information about the current weather on the home screen.

Location – set the device location for weather forecast. Press the Home page weather area shortly to set the location in the Weather / Settings section, which will be displayed automatically. Use the keypad to enter the location name with diacritic marks. Prague is the default location value.

Units – allows you to set display in metric (°C) or imperial (°F) units.

Enter a code to access the Advanced settings. Set the Advanced settings access code in the web configuration interface (Hardware > Display > Advanced settings code > Advanced settings code).

Restart Device – restart the device. The process takes about 30 s. Once restart is completed and the device is assigned its IP address, the login window is displayed automatically.

This section provides basic information on the device (serial number, MAC address, FW version, IP address, My2N ID).

Use a long touch of the IP address to set the network interface port mode to be offered for auto-negotiation. The mode can be selected only if the required port mode is defined automatically, see Network.