The HTTP Command on the 2N Indoor View helps send HTTP commands by a button press. You can find the buttons on the displays of the Home screen, on the display during calls and on the display during camera preview. Up to 3 HTTP commands can be set up for each of the button displays.

URL – set the HTTP command to be sent to an external device by pressing a button. The command is sent via the HTTP (GET request). The command format is http://ip_address/path. E.g. “http://192.168.1.50/relay1=on”. If the parameter is empty, the command is not sent.

Icon – choose the HTTP command button icon. The button is displayed on the device home page and can be used for sending the set HTTP command.

Name – set the HTTP command name.

Username – set the user name for authentication of the HTTP command to be sent by pressing a button. The parameter is mandatory only if the requested device requires authentication.

Password – set the password for authentication of the HTTP command to be sent by pressing a button. The parameter is mandatory only if the requested device requires authentication.