2N Indoor View helps you configure up to 16 external cameras for video call streaming.
Note | |
---|---|
The 2N answering units receive standard external IP cameras supporting the RTSP streams meeting the following limits:
|
Camera enabled – enable RTSP stream download from an external IP camera. Complete the valid RTSP stream address or the username and password to make the function work properly.
Click to open the device list and select the devices to which a camera is to be assigned. In the call with the device to which the camera is assigned, it is possible to show the selected camera preview on the answering unit and switch it to previews of other assigned and allowed cameras.
Click to cancel all assignments of the selected camera.
Tip | |
---|---|
Cameras can also be assigned to devices in respective device settings in the Directory > section Device. Once saved, the change will automatically be written in both the sections. |
Display Name – set the name to be displayed at the camera preview in the directory on the device. If the parameter is empty, the default name set for the selected language is displayed.
RTSP Stream Address – enter the IP camera RTSP stream address: “rtsp://camera_ip_address/parameter1=value¶meter2=value”, refer to the parameter table below. The parameters are specific for the selected IP camera model. If you choose another 2N IP intercom for the external camera, enter “ http://ip_address/mjpeg_stream” or “http://ip_address/h264_stream”.
Parameter |
Description |
Example / Values |
---|---|---|
audio |
audio |
|
fps |
frame rate |
fps=15 (1 to 30 fps, maximum MJPEG video codec value is 15 fps). |
vbr |
video bitrate |
vbr=768 for 768 kbps |
vcodec |
video codec |
vcodec=h264 for codec H.264 vcodec=mjpeg for codec MJPEG |
vres |
video resolution |
vres=1920x1080 for FullHD |
zipstream |
zipstream |
|
Username – enter the username for the external IP camera authentication. The parameter is mandatory only if the external IP camera requires authentication.
Password – enter the external IP camera authentication password. The parameter is mandatory only if the external IP camera requires authentication.
Local RTP port – set the local UTP port for RTP stream receiving.
The Camera Preview window displays the current image received from an external camera. In case the camera is disconnected or misconfigured, N/A is displayed on a black background.
Can we advise you on anything else?
Take advantage of our technical support and sales specialists.