Follow the instructions below 2N Indoor View to reset the factory default values:
-
Press and hold the RESET button.
-
Wait until the red and green LEDs go on simultaneously on the device and the acoustic signal can be heard
(approx. 15–35 s). -
Wait until the red LED goes off and the acoustic signal can be heard
(approx. for another 3 s). -
Wait until the green LED goes off and the red LED goes on again and the acoustic signal can be heard
(approx. for another 3 s). -
Wait until the red LED goes off and the acoustic signal can be heard
(approx. for another 3 s). -
Release the RESET button.
Can we advise you on anything else?
Take advantage of our technical support and sales specialists.