2N Indoor View is configured via the administration web interface. Connect the device to the LAN IP and make sure it is properly powered. You have to know the IP address for access.
Enter the domain name as “hostname.local”. The new device Hostname consists of the device name and serial number. See below for the device name formats in Hostname. The serial number is entered without hyphens. You can change Hostname in System > Network later.
Ddefault domain name 2N Indoor View: 2NIndoorView-{serial number without dashes}.local (e.g.: “2NIndoorView-0000000001.local”)
Login based on a domain name is advantageous if the dynamic IP address is used. While the dynamic IP address changes, the domain name remains the same. It is possible to generate certificates signed by a trusted certification authority for the domain name.
To retrieve the device IP address, take the following steps, see IP Address Retrieval:
-
Fill in the 2N Indoor View address or domain name into the internet browser.
The login screen is now displayed.
Should the login screen fail to appear, you must have typed a wrong IP address, port, domain name or the administration web server has been switched off. If you do not have a certificate generated for the IP address or domain name, an invalid security certificate warning may be displayed. In this case, you need to confirm that you want to go to the web configuration interface.
-
Enter the login data.
The default login data are:
Username: Admin
Password: 2n
Can we advise you on anything else?
Take advantage of our technical support and sales specialists.